MP-1 Fluid Bed Multi-Processor™ - batch sizes 200g - 6kg

Multi-Processor Concept
The MULTI-PROCESSOR™ has been developed by Aeromatic-Fielder to meet the industry's requirements for flexibility in unit operations and is based on the principle that one basic unit can be used for numerous processes simply by interchanging a module.

• The Drying module
• The Top Spray Granulation module
• The Spray Dryer Granulator module
• The PRECISION-GRANULATOR™ module
• The PRECISION-COATER™ module

The concept is available in sizes ranging from the MP-1 lab unit up to full production scale equipment built in compliance with current GMP and safety standards. Only the highest qualities of materials are used to build the MULTI-PROCESSOR™ giving you a long lasting and reliable unit for your process work.

MP-1 Fluid Bed Processor

Features:

• Self-contained control unit
• PLC control system with Siematic S7
• Local operator interface terminal
• Automatic recipe control function
• Data- capture equipment

Size		12 litre bowl	16 litre bowl
Drying	kg	0.2 - 2	1 - 6 *
Top Spray Granulation	kg	0.2 - 1	1 - 3 *
Spray Dryer Granulation	kg	0.2 - 1	1 - 6 *
PRECISION-COATER™	kg	0.2 - 1	1 - 6 **

* Products with bulk density of 0.5gms/cm3
** Products with bulk density of 0.8gms/cm3


Options for Special Applications
The standard MP-1 is equipped to carry out the majority of every day processing. However, to meet special customer requirements a range of options is available.

• Reduced volume containers
• Selection of air distributors
• Hinged expansion piece
• Product agitator
• Powder injector system
• HEPA filtration of inlet air
• Dehumidification of inlet air
• Humidification of inlet air
• Steam or ceramic heater
• Closed cycle operation
• Solvent recovery system
• Selection of filter materials
• Police filters
• Built-in fan ("Compact Design")
• Noise attenuator (silencer)
• Screen based control panel
• Expanded control packages
• Data logging
• Recipe handling
• Explosion-proof controls
• 10 bar pressure shock resistant design

Easy Scale-Up
All process can be carried out also in large scale MULTI-PROCESSOR™.

With the MULTI-PROCESSOR™ concept maximum flexibility is achieved because the function of the equipment can be changed at a later date by simply using another module.

If the high flexibility of the Multi-Processors is not required, large scale plants can also be built as dedicated production units using Aeromatic-Fielder's "Building Block System".