The Buck Systems blending technology is extended further with our range of Post Hoist Blenders. All of the features and benefits of the Pedestal Container (IBC) Blenders are repeated with the Post Hoist range. But the added benefits of elevating the IBC after blending allowing for direct discharge into a downstream process.

Milling and Blending
By carry out blending functions on the Post Hoist, the blender has the versatility to carry out discharge operations directly after blending. A common application is to allow blended material to be discharged through a mill or sieve into a receiving IBC. The IBC is aligned and clamped on the IBC Blending Cage, before being docked with the Buck® active valve on the inlet of the Mill. Controls and interlocks for the Buck® Valve are managed through the Post Hoist control system.

Features and Benefits:

  • Allows gravity discharge from an IBC to a downstream pharma process – removes need for vacuum conveying
  • Lifts and holds IBC directly above process machine – no need for discharge stations
  • Twin Chain Lifting Carriage*
  • Electrical braked motor
  • No Hydraulics
  • St/St Front Dust Cover
  • Fully enclosed column and drive motors
  • Robust Mechanical Construction
  • IBC Forks for secure and accurate lifting and docking
  • Drum Module Handling
  • IBC Inverting Module
  • IBC Blending Module
  • IBC Weighing Module
  • FBD Bowl Module
  • Fail-safe and Stress Free Clamping System(for Inversion and Blending Modules)
  • Positive IBC Detection
  • Pallet Truck Loading
  • Manual Slewing
  • Powered Slewing
  • Through the Wall design
  • User Friendly Control System
  • ‘Hold to Run’ Controls
  • Siemens PLC and HMI
  • Allen Bradley PLC and HMI
  • Variable Speed Lifting Drive
  • CFR 21 Part 11 compliant
  • ATEX Compliance
  • Validation Documentation in accordance to GAMP

* PH600 and above.

Technical Details PH150 PH300 PH600 PH1000 PH1500 PH2000
IBC size 1 2 3/4 3/4 4 4
Max. IBC size (litres) 150 300 600 1000 1500 2000
Max weight IBC + product (kg) 150 300 600 900 1250 1600
Lift speed 2 metres per minute
Column height Up to 4 metres
Reach 1450mm from centre of column to centre of IBC
Lifting limit switches 1 upper over travel / 2 load poistion/ 3 process position
Fixing floor floor and ceiling
Cable connection points Base of column
Control system Column mounted controls with push button and pilot lamps

 Back  Top of page